[. . . ] You can even upgrade your system to get more power, using an optional pin connector and the master/slave switch on the amplifier. [. . . ] You can even upgrade your system to get more power, using an optional pin connector and the master/slave switch on the amplifier. ✹More Compact
Unlike conventional power amplifiers, the radiation structure works without a fan. The result is a powerful amplifier compact enough for installing under normal car seats. Special IC patterns for audio use were applied for quality sound.
✹Other Main Features
Total Harmonic Distortion (%)
Under front seat
In car trunk
0. 0001
0. 1
Output Voltage Vo (Vrms)
0. 5
1
5
10
- Gold-Plated Block Terminal (45°Angle Mount) * Power - 4AWG * Speaker Out - 8AWG - Variable Bass Boost (0-18dB) - Input RCA Terminal - Output RCA Terminal (Pass Through) - SYNC Terminal x 1
Optional Bass Boost Remote Control
Standalone setup
Cascade stacking
✹Adjustable Plate
The plate can be attached in 4 ways to give the best looks to match your setting.
RM-RK130
Plate attachable in 4 ways according to setting
Hand-adjustable control keys (2cm diameter)
Key Specifications T-X3
Topic Features Operation Channel Max. Power Output RMS Power Output CEA-2006 compliant 1 1800W (@ 1Ω) 500W RMS x 1 1000W RMS x 1 1500W RMS x 1 Class-D 20 - 300Hz < 0. 1% @ 100Hz 2V/45 kΩ (0. 3 - 6V variable) 50 - 300Hz, -18dB/oct 20 - 50Hz, -18dB/oct ✔ 45Hz, 0-18dB ✔ 14 3/16” x 2 3/8” x 9 11/16” (360 x 60 x 245 mm)
Recommended System
CS-ARS650 KD-AVX77 CS-ARS650
@ 4Ω @ 2Ω @ 1Ω
Front
Circuit Class Frequency Response (0, -3dB) THD (Total Harmonic Distortion) Line Input: Level/Impedance Crossover HPF LPF Subsonic Filter Other Controls Phase Control (0°/180°) Variable Bass Boost Control Generals Anti-Pop Circuit Dimensions (W x H x D)
KS-AR8004D
Rear KS-AR8002D
CS-AR690 T-X3 T-X3
CS-AR690
CS-AW8520
CS-AW8520
NTK-0673-27 [. . . ] Special IC patterns for audio use were applied for quality sound.
✹Other Main Features
Total Harmonic Distortion (%)
Under front seat
In car trunk
0. 0001
0. 1
Output Voltage Vo (Vrms)
0. 5
1
5
10
- Gold-Plated Block Terminal (45°Angle Mount) * Power - 4AWG * Speaker Out - 8AWG - Variable Bass Boost (0-18dB) - Input RCA Terminal - Output RCA Terminal (Pass Through) - SYNC Terminal x 1
Optional Bass Boost Remote Control
Standalone setup
Cascade stacking
✹Adjustable Plate
The plate can be attached in 4 ways to give the best looks to match your setting.
RM-RK130
Plate attachable in 4 ways according to setting
Hand-adjustable control keys (2cm diameter)
Key Specifications T-X3
Topic Features Operation Channel Max. [. . . ]